Author: brigitte

Posted on by

Antique Car – Continued – Making of Top and Details like Ligths, Bumpers, etc.

This is the last blog post regarding the production of our new classic car. The pdf and svg file set is already available in the shop. It can be used with a cutting device that has a cutting mat of at least 8 x 12″. So e.g. Silhouette Cameo (with Silhouette Studio from Designer Edition), Brother ScanNCut, Cricut Maker. With Cricut Joy the cutting mat is unfortunately too small.

In the next step, the top is made. The transparent window panes are glued in first (it is best to use transparent film for cutting).

After gluing the window panes, you should ideally glue the entire top together. This has the advantage that you can still reach into the top with tweezers or fingers, later when the top is mounted on the body this is no longer possible.

Finally, the completely glued together radiator grille is placed on the bonnet and glued on.

As the last section you have to produce all the small details like headlights or mirrors. In view of the many small parts, this is a relatively laborious affair, but it is really worth it due to the great later appearance of the classic car!

Finally, a few photos of the finished classic car – the rear view with the case is also a real eye-catcher!

Create a Classic Car with printable paper craft sheet or svg cuttingfiles for Cutting Machines
Posted on by

Antique Car – Continued – Making the interior

Today you will learn more details about the production of the interior of the classic car.

This time I made the seats with printed design paper (with a checkered pattern).
You can print out the design paper with your own printer and it is available in our second shop mediendesign-moser.at.

First the parts of the dashboard are glued together.
Then details such as pedals and gears are attached to the base plate.
After the seats have been manufactured, they are also attached to the passenger cabin.

Tomorrow it will continue – as promised, the SVG file set for this classic car will be available in this shop.
I’ll also show you how to make the hood and roof of this car.
Sequel follows ….

Posted on by

Antique Car – Continued – Making of hood and passenger compartment

Today continues with the production of the vehicle body.

For the vehicle construction, a few parts have to be provided with reinforcements. This makes it much easier to glue different parts later. In addition, the reinforcements help to ensure that the vehicle has the right shape.

The hardest part is definitely when you wrap the engine part and the vehicle cabin. Even if you work very carefully, it can happen that you get unwanted creases in the paper.

To make it a little easier to glue the sheathing and to conceal any kinks, I have added the following two auxiliary parts to the SVG file set:

The elongated cuboid can be glued into the engine area. This gives a little more resistance when gluing the sheathing.

With the second sheathing part you can then smooth the bonnet a bit.

In the next step, the vehicle cabin is then manufactured, which is then glued into the casing.

The next blog post will follow shortly – with the detailed design of the vehicle interior.

To be continued ….

Posted on by

Antique Car – Continued – Making Wheels

Today I show you how the wheels of the vintage car are made.

You can watch the video below so that you can follow exactly how the wheels are made

Another hint: Sometimes it is very helpful if you e.g. use a table edge to fold parts. I folded the wheel axles with the help of a table edge, which makes the folds much more precise.

In the photos below you can see how I glue the wheels onto the axle. If you work very precisely, the wheels can turn later – like on a toy car.

This is what the finished lower part of the classic car looks like:

More details will follow soon …

Posted on by

Announcement – Cuttingfile for Antique Car

On August 19, 2022 a really great new cutting file is coming to our shop! This is a cutting template for a large and very detailed classic car!

Antique Car – Coming soon a new Cutting file for Cutting Machines like Cricut, Silhouette, Brother ScanNCut

In the meantime until 19.8. I will also publish some making-of blog posts so that you can follow how such a classic car is gradually being created.
The size of the finished vehicle is as follows: length 26 cm, width 9 cm and a height of 11.5 cm.

The cutting parts can be cut with A4 paper. If you have a very large cutting mat (12×24″) and very large paper, then you could – if you like – also cut the classic car about a third larger!

Below are the first making-of photos – the base plate and the wheels are created

Posted on by

Christmas Sleigh with Reindeers

NEW IN OUR SHOP!!!

We have created a BIG Cutting File Set! Christmas Sleigh with reindeers on a pathway surrounded by snowy hills and trees!

The finished item is very big – the final size of the pathway is about 62 cm x 12 cm (size with 4 reindeers. Further reindeers can be added, this increases the length).

This cutting file set is prepared e.g. for Cricut Maker, Silhouette Cameo or Brother ScanNCut

Posted on by

A Birthday Pop Up Card

Our Basic Card Designs also work for creating a Birthday Card.

For making this card I used the Basic Card #03 and the Happy Birthday Cardmotifs.

The final card comes with the Pop Up Card itself, a pull-out case and an suitable envelope

Birthday card with pull out case
Card, pull out case and envelope
Posted on by

Pop Up Card for Christmas

A new basic card has moved into our shop. This card folds apart when you open it, which is a particularly great effect.

For making this card I used the Basic Card #03 and the Christmastree Cardmotifs

The Cutting Files Set for the Basic Card #03 include the Pop Up Card itself, a pull out case for the card and an additional envelope if you want to send this card by post